The megapixel HD digital card can connect 16 megapixel HD digital cameras at most.

1. Connect the megapixel HD digital card to the Motherboard PCI port.
2. Connect the Flat Cable according to the connection instruction.
3. Connect the digital camera to the switcher, then connect the switcher to the RJ45 port (Port 1)of the Megapixel HD digital card

After finishing all the connections, please turn on the power supply switch to start the system. The system will automatically detect the digital cameras and the images will come out.
Remark: please make sure to do the correct connections according to the instructions. If you connect the wrong port, it would be without image displaying. Kindly please note that different manufacturers make the 5V port in different position.
There are two ways to connect the flat cable ports (Refer connection instruction picture).

1. “4” connects 5V, “5” connects DX-, “6” connects DX+, “7” connects GND.
2. “4” connects 5V, “5” connects DY-, “6” connects DY+, “7” connects GND.

Connection instruction

1. LAN port (connect switcher or digital camera).
2. The white line of Flat Cable which connects to port 3.
3. Connects the white line of Flat Cable
4. The red line connects Motherboard USB 5V port.
5. The white line connects Motherboard USB DX- port.
6. The green line connects Motherboard USB DX+ port.
7. The black line connects Motherboard USB GND.

Model No.: BL-V200(Linux)
Video input: 16-CH
Screen resolution: 1024X768/1280X1024/1366X768/1440X900/1920X1080
Display mode: 16 split screens, 1 screen enlarged
Communication interface: RJ45, 100M Self-adaptive Ethernet Interface
Power consumption: Max. 4W
Working temperature: -10 ~ +55℃
Storage temperature: -20 ~ +70℃
Working humidity: 10 ~ 85%